Radium 20-1773 VTA to VTE Competition Catch Can Adapter 10AN ORB
Radium Engineering

Radium VTA to VTE Competition Catch Can Adapter 10AN ORB

$61.99

or 4 interest-free payments of $15.50 with Afterpay

Part no. 20-1773

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium VTA to VTE Competition Catch Can Adapter 10AN ORB

Application: Radium VTA Competition Catch Cans 20-0771 and 20-0772 Part Type: VTA to VTE conversion plate kit Part Number: 20-1773

This adapter converts the previous generation of Radium VTA (vent-to-atmosphere) Competition Catch Cans into a dual inlet/outlet VTE (vent-to-engine) catch can that matches the current lineup. Removing the top three screws allows the VTA plate to be swapped for the VTE plate and gasket, adding two 10AN ORB (7/8"-14) ports.

With the can converted to VTE, purified air is recirculated back into the intake. The top and side ports can be used interchangeably as inlets or outlets – just keep both inlets on the same side and both outlets on the same side.

Key Features

  • Converts VTA to VTE: Turns a 20-0771/20-0772 VTA can into a dual inlet/outlet VTE can
  • Two Extra Ports: Adds two 10AN ORB (7/8"-14) ports
  • Simple Swap: Remove three screws and replace the VTA plate with the VTE plate and gasket
  • Closed System: Recirculates purified air back into the intake

What's Included

  • VTE plate
  • Gasket

Optional Parts

  • Radium Competition Catch Can, VTA, 2-Port, Extra Large (20-0771) – VTA can this adapter converts
  • Radium Competition Catch Can, VTA, 2-Port, Large (20-0772) – VTA can this adapter converts
  • Radium Catch Can Petcock Drain Kit (20-0024) – optional drain for the catch can

Important Notes

  • Do not purchase for 20-1771 or 20-1772 – the adapter is already included with those kits
  • A PCV valve is sold separately – flow direction must be towards the intake manifold (vacuum). An OEM PCV valve only works if it is factory mounted on the intake manifold; if it is on the breather (valve cover) port, a PCV valve must be installed at the catch can
  • Adapter fittings and thread locker are not included
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Radium VTA Competition Catch Can 20-0771
  • Radium VTA Competition Catch Can 20-0772

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.