Radium 20-1101-00 RA Series FPR Fuel Pressure Regulator Conversion Kit
Radium Engineering

Radium RA Series FPR Fuel Pressure Regulator Conversion Kit

$130.99

or 4 interest-free payments of $32.75 with Afterpay

Part no. 20-1101-00

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium RA Series FPR Fuel Pressure Regulator Conversion Kit

Application: Universal – previous-generation Radium adjustable fuel pressure regulators Part Type: RA-series fuel pressure regulator conversion kit Part Number: 20-1101-00

The Radium RA-Series FPR Conversion Kit allows all previous Radium Engineering adjustable fuel pressure regulators to be converted to an RA-Series FPR, adding the newest RA-Series features and performance improvements to an existing regulator.

It suits all generations of the Radium Direct Mount Regulator, Multi-Port Regulator and Fuel Pressure Regulator Damper, as well as Radium hangers and surge tanks with an integrated regulator.

Key Features

  • Tool-less Adjustment: Turn the knob to set fuel pressure – detents give approx. 1 psi (±0.5 psi) per click, no jam nut or set screw
  • Stable Pressure: Single stainless steel return orifice designed for laminar flow
  • 1:1 Vacuum Reference: 360° swivelling, double O-ring sealed vacuum port
  • Interchangeable Vacuum Fittings: Four #10-32 threaded fittings: 5mm barb, 3AN male, 1/4in push-to-connect and vacuum plug for returnless systems
  • Wide Compatibility: Converts DMR, MPR and FPR damper regulators of all generations
  • Fuel Compatibility: All petrol types (unleaded, leaded, oxygenated, pre-mix) plus methanol, ethanol and E85

What's Included

  • Upper rotating assembly
  • 5mm barbed vacuum fitting
  • Vacuum plug fitting (returnless)
  • 1/4in push-to-connect vacuum fitting
  • 3AN male vacuum fitting
  • Anodised half moon retainers
  • Stainless steel return orifice
  • Stainless button head screws
  • Stainless steel spring
  • Fluorosilicone diaphragm

Important Notes

  • Use a wicking, medium-strength threadlocker when installing the vacuum fitting
  • A rapid fuel pressure drop after shut-off is normal for aftermarket regulators – pressure resets when the pump runs again
  • Long cranking or slow pressure build-up is not caused by the regulator – it typically indicates fuel draining back to the tank from an internal pump module leak (e.g. venturi jet pump or missing check valve)
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Universal – see Application
  • Radium Direct Mount Regulator (all generations)
  • Radium Multi-Port Regulator (all generations)
  • Radium Fuel Pressure Regulator Damper (all generations)
  • Radium hangers and surge tanks with integrated regulator

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.