Radium MPFST-R Multi-Pump Fuel Surge Tank (Built-In Regulator) – view 12
Radium Engineering

Radium MPFST-R Multi-Pump Fuel Surge Tank (Built-In Regulator)

$1,187.99

or 4 interest-free payments of $297.00 with Afterpay

Part no. 20-1445

Options

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium MPFST-R Multi-Pump Fuel Surge Tank (Built-In Regulator)

Application: Universal – external fuel surge tank for vehicles with poorly baffled fuel tanks Part Type: Multi-pump fuel surge tank with built-in regulator (MPFST-R) – fuel pumps not included Part Number: 20-1445, 20-1446, 20-1447

A fuel surge tank prevents fuel starvation in vehicles with poor tank baffling. A lift pump – usually the OEM in-tank pump – fills the surge tank, and its fuel volume keeps the MPFST-R pump(s) supplied through momentary lift-pump starvation. The volume is maintained by the lift pump and by fuel returning from the built-in regulator, with excess fuel returning to the main tank.

The MPFST-R is returnless: the built-in RA-series regulator sends low-pressure fuel back into the surge tank, so no external regulator return line is needed and the single feed line dead-ends at the engine. It accepts 1, 2 or 3 pumps.

Key Features

  • Built-In Regulator: RA-series regulator with tool-less knob adjustment, approx. 1 psi per detent
  • Returnless Feed: Single feed line dead-ends at the engine – no external FPR return line
  • Swivel Vacuum Port: 360° swivelling, double O-ring sealed vacuum reference port, 1:1 capable
  • Gauge Port: 1/8in NPT port for a fuel pressure gauge or sensor
  • Multi-Pump: 1, 2 or 3 pumps merged through the regulator outlet
  • High-Current Electrical: Anti-rotation high-current electrical studs
  • Mounting: Mounting feet suit M6 or 1/4in fasteners
  • Fuel Compatibility: Internal wiring is petrol, ethanol and methanol compliant

Available Configurations

  • 20-1445: Walbro GSS342, AEM 50-1200, DeatschWerks DW440 – 1, 2 or 3 pumps
  • 20-1446: DeatschWerks DW400, Bosch BR540 – 1, 2 or 3 pumps (BR540 has no check valve – primary pump only when staged; only 2 pumps fit with the optional level switch)
  • 20-1447: Walbro F90000267, F90000274, F90000285, F90000295 – 1, 2 or 3 pumps (F90000295 has no check valve – primary pump only when staged)

What's Included

  • MPFST-R surge tank with built-in regulator
  • Anti-rotation high-current electrical studs
  • Ring terminals and hardware
  • 8AN male adapter on the pump outlet port
  • 6AN male adapters on the overflow and supply ports
  • 1/8in NPT plug
  • Four interchangeable 10-32 vacuum fittings
  • Screw to plug the vacuum reference

Optional Parts

  • Radium Fuel Pressure Gauge 0-100psi (20-0029) – 0-100 psi gauge for the 1/8in NPT port
  • Radium Fuel Level Switch, 1/8" NPT (20-0461) – level switch for a dash indicator, ECU input or lift pump control
  • Radium Fuel Level Switch Plus Diagnostic Indicator (20-0519) – level switch with diagnostic LED

Important Notes

  • Fuel pumps, gauge, level switch and LED indicator are not included
  • The overflow port cannot be capped
  • Vehicles without a return on the tank need a return port created (see Radium's technical data sheet)
  • Plugging the vacuum reference gives constant fuel pressure
  • Use PTFE thread sealant on NPT threads and bench-test the level switch signal direction before installing
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Universal – see Application

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.