Radium 20-1322 Fuel Pump Hanger Suit Walbro F90000267/274/285 - Holden Commodore VE VF/Chevrolet Camaro SS 10-15
Radium Engineering

Radium Fuel Pump Hanger Suit Walbro F90000267/274/285 - Holden Commodore VE VF/Chevolet Camaro SS 10-15

$1,135.99

or 4 interest-free payments of $284.00 with Afterpay

Part no. 20-1322

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Pump Hanger Suit Walbro F90000267/274/285 - Holden Commodore VE VF/Chevolet Camaro SS 10-15

Application: Holden Commodore VE / VF, Holden Caprice, Chevrolet Camaro / SS / Caprice PPV / Omega, Cadillac CTS / CTS-V, Pontiac G8 Part Type: Billet aluminium fuel pump hanger – pumps not included Part Number: 20-1322

The Radium Fuel Pump Hanger replaces the factory in-tank fuel pump module on 2008-2017 GM cars including the Holden Commodore VE / VF, Chevrolet Camaro and Cadillac CTS-V and supports one, two or three aftermarket fuel pumps. All OEM sensors can be reused.

A one-piece anodised aluminium collector box with three one-way fill valves (355 LPH each) keeps fuel around the pump inlets, refilled by the pressure regulator return and the jet pump crossover line. Pre-pump filtration is provided for all three pumps through three separate chambers, and the OEM return line restriction is removed so higher-flow pumps can be used. The OEM pressure regulator and post-pump filter are eliminated – Radium's CTS-V and Camaro plumbing kits include both.

Key Features

  • Verified Pumps: Walbro F90000267 / F90000274 / F90000285; Protec 11928, Fuelab 49614 and DeatschWerks DW810 with 13-1187 base
  • Up to Three Pumps: Replaces the OEM module with support for one to three aftermarket pumps
  • OEM Sensors Retained: All OEM sensors can be reused, with two billet level sensor mounts
  • Collector Box: One-piece anodised aluminium with three 355 LPH one-way fill valves
  • Chambered Pre-Filtration: Three separate filter chambers, one per pump
  • Reduced Return Restriction: Allows higher-flow pumps to be used
  • Electrical: Studs with anti-rotation terminals

What's Included

  • Collector box, one-way fill valves and mounting hardware for one to three pumps (unused parts may be left out)
  • Two billet aluminium level sensor mounts
  • Two SAE quick connect fittings for the factory feed line and two for the crossover line
  • SAE plugs to cap the feed line after the pressure sensor
  • 8AN ORB to 6AN male banjo fitting for the return port
  • Spare 8AN ORB to 6AN male fitting

Optional Parts

  • Radium Engineering Fuel Pump Filter Base Adapter – 12mm Brushless Pumps (13-1187) – Required for Protec 11928, Fuelab 49614 and DeatschWerks DW810 pumps
  • Radium Fuel Hanger Plumbing Kit with Stainless Filter, Cadillac CTS-V (20-1325-03) – 2008-2015 CTS-V only; requires Radium fuel rails
  • Radium Fuel Hanger Plumbing Kit with Microglass Filter, Cadillac CTS-V (20-1325-05) – 2008-2015 CTS-V only; requires Radium fuel rails
  • Radium Fuel Hanger Plumbing Kit with Stainless Filter, Chevrolet Camaro LS3/LS7/L99 (2010-2015) (20-1326-03) – 2010-2015 Camaro LS3/LS7/L99 only; requires Radium fuel rails
  • Radium Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Camaro LS3/LS7/L99 (2010-2015) (20-1326-05) – 2010-2015 Camaro LS3/LS7/L99 only; requires Radium fuel rails
  • Radium DIY Fuel Pump Hard Wiring Kit (17-0031) – One wiring kit per aftermarket pump

Important Notes

  • Fuel pumps are not included
  • Protec 11928, Fuelab 49614 and DeatschWerks DW810 pumps do not fit the included strainer and require the 13-1187 base (sold separately)
  • The OEM regulator is removed – an aftermarket fuel pressure regulator is required (included in the 20-1325 / 20-1326 plumbing kits)
  • The OEM post-pump filter is removed – fit a low-micron filter downstream (included in the plumbing kits)
  • Fuel pressure may not hold after shut-down without a check valve – fit one if not using a plumbing kit
  • The OEM venturi jet pump uses approx. 15-45 LPH depending on fuel pressure – factor this into pump sizing
  • Single-pump installs can reuse the OEM controller wiring, but upgraded wiring is recommended for full pump performance
  • Radium lists the Holden Commodore VE for 2008-2009 and the VF for 2014-2017 – contact us to confirm fitment for other model years
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Holden Commodore VE (2008-2009)
  • Holden Commodore VF (2014-2017)
  • Holden Caprice (2009-2017)
  • Chevrolet Camaro (2010-2015)
  • Chevrolet SS (2014-2017)
  • Chevrolet Caprice PPV (2009-2017)
  • Chevrolet Omega (2008-2009)
  • Cadillac CTS (2008-2014)
  • Cadillac CTS-V (2008-2015)
  • Pontiac G8 (2008-2009)

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.