Radium 20-0598 Fuel Pump Adapter For Walbro F90000267 / F90000274 Pumps Only
Radium Engineering

Radium Fuel Pump Adapter For Walbro F90000267 / F90000274 Pumps Only

$69.99

or 4 interest-free payments of $17.50 with Afterpay

Part no. 20-0598

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Pump Adapter For Walbro F90000267 / F90000274 Pumps Only

Application: TI Automotive E5LM (BKS1000 / BKS1001), Walbro/TI F90000295, Bosch Motorsport BR540, DeatschWerks DW400 (pre May 2019) Part Type: Fuel pump outlet adapter with check valve, 6AN male Part Number: 20-0598

The Radium Engineering check valve adapter fits the outlet of compatible fuel pumps and converts it to a 6AN male connection. It replaces the standard integrated check valve, which is a significant flow restriction – lowering the restriction allows the pump to run at a lower current, keeping fuel cooler and reducing the risk of cavitation.

The adapter is machined from billet aluminium and held together with a stainless steel retainer and bolts, with a stainless steel plunger and spring forming the one-way valve. FKM O-rings provide a leak-free seal and E85 compatibility.

Key Features

  • Low Restriction: 15 LPH restriction vs 46-76 LPH for a standard integrated check valve
  • Lower Current Draw: 0.5A vs 3.2-4.8A for a standard check valve
  • 6AN Male Outlet: Converts the pump outlet to 6AN male
  • Stainless Valve: Stainless steel plunger and spring
  • Billet Aluminium: Anodised top and base with stainless retainer and bolts
  • E85 Compatible: FKM O-rings throughout

What's Included

  • Anodised aluminium 6AN male top
  • Anodised aluminium bottom base
  • Check valve plunger with FKM O-ring
  • 1x Additional FKM O-ring
  • 2x Half-moon retainers
  • Check valve spring
  • Stainless steel hardware

Important Notes

  • Specific to the pumps listed under Vehicle Fitment – the adapter may physically fit other pumps, but many of those have internal check valves and should use Radium's outlet adapters without check valve
  • Inspect the pump outlet hose barb ridges before ordering – damaged or out-of-round ridges may prevent the O-ring from sealing
  • A 10mm barb version (20-0798) is also available
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • TI Automotive E5LM (BKS1000 Brushless Controller Kit)
  • TI Automotive E5LM (BKS1001 Brushless Controller Kit)
  • Walbro / TI Automotive F90000295
  • Bosch Motorsport BR540
  • DeatschWerks DW400 (pre May 2019)

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.