Radium 20-0386 Fuel Pressure Gauge w/8AN ORB Adapter
Radium Engineering

Radium Fuel Pressure Gauge w/8AN ORB Adapter

$137.99

or 4 interest-free payments of $34.50 with Afterpay

Part no. 20-0386

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Pressure Gauge w/8AN ORB Adapter

Application: Universal – any 8AN ORB female port Part Type: Fuel pressure gauge with 8AN ORB adapter and 90° fitting Part Number: 20-0386

The Radium Fuel Pressure Gauge is a high-accuracy, silicone-filled gauge suitable for all fuelling applications. The silicone fluid stops the needle vibrating so readings are easy to take, and it reads 0-100 psi (0-6.9 bar) at ±2% accuracy through an acrylic lens.

The gauge has a rugged stainless steel case with a nickel-plated 1/8" NPT male fitting. The 20-0386 kit adds an 8AN ORB to 1/8" NPT adapter and a 90° 1/8" NPT fitting, so the gauge can be mounted to any 8AN ORB port and angled for visibility.

Key Features

  • High Accuracy: ±2% across 0-100 psi (0-6.9 bar)
  • Silicone Filled: Damps needle vibration for steady readings
  • Rugged Case: Stainless steel case with acrylic lens
  • 8AN ORB Adapter: 8AN ORB to 1/8" NPT adapter included
  • 90° Fitting: 1/8" NPT male to 1/8" NPT female 90° fitting included
  • Finish: Black bezel and housing

What's Included

  • 0-100 psi fuel pressure gauge
  • 8AN ORB to 1/8" NPT adapter fitting
  • 90° 1/8" NPT male to 1/8" NPT female fitting

Optional Parts

  • Radium Fuel Pressure Gauge 0-100psi (20-0029) – Gauge only
  • Radium Fuel Pressure Gauge 0-100psi w/8AN ORB Adaptor (20-0075) – Gauge with 8AN ORB adapter, no 90° fitting
  • Radium Fuel Pressure Gauge w/ 6AN Inline Adapter (20-0152) – Gauge with 6AN inline tee
  • Radium Fuel Pressure Gauge With 90 Deg Adapter (20-0407) – Gauge with 90° fitting only

Important Notes

  • The small internal silicone bubble is normal
  • Over-pressurising the gauge can permanently misalign the needle calibration
  • Use PTFE thread sealant paste or tape on NPT threads – hand tighten, then 1.5 to 3 turns past hand tight with a spanner
  • Do not thread the gauge in by gripping the gauge body – this damages the gauge

Vehicle Fitment

  • Universal – see Application

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.