Radium 20-1011-03 Fuel Hanger Plumbing Kit with Stainless Filter, Chevrolet Corvette C7 (2014-2019)
Radium Engineering

Radium Fuel Hanger Plumbing Kit with Stainless Filter, Chevrolet Corvette C7 (2014-2019)

$1,259.99

or 4 interest-free payments of $315.00 with Afterpay

Part no. 20-1011-03

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Hanger Plumbing Kit with Stainless Filter, Chevrolet Corvette C7 (2014-2019)

Application: Chevrolet Corvette C7 (2014-2019) – manual transmission only, with Radium 20-1010 hanger Part Type: Fuel hanger plumbing kit with stainless filter Part Number: 20-1011-03

The Radium 20-1011-03 Plumbing Kit supplies all the plumbing between the Radium 20-1010 C7 fuel pump hanger and the engine – fuel filter, fuel pressure regulator, hoses, adapter fittings and mounting hardware. From the hanger outlet, 8AN PTFE hose runs to a chassis-mounted check-valve fuel filter near the tank, and a tee in the feed line allows the OEM pressure sensor to be retained for tuning.

A second 8AN PTFE hose runs through the tunnel to the regulator, with thermal insulation protecting the hose and vacuum tubing from the exhaust. The MPR-RA regulator mounts near the brake master cylinder and connects to the OEM high-pressure fuel pump through the stock feed line via an SAE quick connect, while the OEM feed line from the tank is repurposed as the return line. A fuel pressure gauge and adapters are included to calibrate the regulator.

Key Features

  • Complete Plumbing: Filter, regulator, gauge, hoses, fittings and mounts in one kit
  • MPR-RA Regulator: Multi-port regulator mounted near the brake master cylinder
  • Check-Valve Filter: Chassis-mounted filter with integrated check valve
  • OEM Pressure Sensor: Tee in the feed line retains the OEM sensor for tuning
  • PTFE Lines: 8AN PTFE feed hoses and 6AN PTFE hose
  • Heat Protection: Thermal insulating sleeve against exhaust heat

What's Included

  • MPR-RA fuel pressure regulator
  • Fuel pressure gauge
  • Fuel filter with check valve – 10 micron stainless element
  • C7 Corvette fuel filter mount and FPR mount
  • 8AN filter adapter fittings
  • 8AN PTFE fuel feed hoses
  • 6AN PTFE fuel hose
  • Thermal insulating sleeve
  • Stainless steel hardware

Optional Parts

  • Radium Engineering Fuel Hanger 2014–2019 C7 Corvette – Pumps Not Included (20-1010) – the C7 fuel pump hanger this kit plumbs (required)
  • Radium Engineering Dual Pump Add-On Mid 2003–2019 Corvette (20-0937) – adds a second independent collector and pump; outlets merge into the single 10AN ORB outlet with check valves for staging

Important Notes

  • Manual transmission only – the plumbing kit is not compatible with automatic transmissions because of fuel filter mount interference
  • The regulator bracket is designed around the factory (left-hand-drive) brake master cylinder location – right-hand-drive converted Corvettes should confirm fitment with Coore before ordering
  • Fuel pump hanger sold separately
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Chevrolet Corvette C7 (2014-2019) – manual transmission

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.