Radium 20-1817-05 Fuel Hanger Plumbing Kit with Microglass Filter, Ford Mustang (2018+)
Radium Engineering

Radium Fuel Hanger Plumbing Kit with Microglass Filter, Ford Mustang (2018+)

$1,889.99

or 4 interest-free payments of $472.50 with Afterpay

Part no. 20-1817-05

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Hanger Plumbing Kit with Microglass Filter, Ford Mustang (2018+)

Application: Ford Mustang S550 (2018-2023) and S650 (2024+) – with Radium 20-180X hanger Part Type: Fuel hanger plumbing kit (6 micron microglass filter) Part Number: 20-1817-05

The Radium 20-1817-05 Fuel Hanger Plumbing Kit includes everything required to install a return fuel system from the Radium 20-180X fuel pump hanger all the way to the engine bay of the 2018+ Mustang. A new high-flow check valve fuel filter (finer 6 micron microglass element), fuel lines, AN fittings and undercarriage fuel line retainers replace the OEM components, and the OEM feed hard line is repurposed as the return line.

Because 2018+ models use both port and direct injection, this kit uses Radium's dual fuel pressure regulator (DFPR), which can regulate pressure with boost at a 1:1 ratio if required, along with adapters for the direct injection high pressure fuel pump and port injection rail. Because the Radium hanger removes the in-tank low-micron filter, the external filter in this kit is required.

Key Features

  • Complete Return System: Plumbs from the fuel hanger to the engine bay
  • PTFE Lines: 6AN and 8AN PTFE fuel lines, long 8AN feed line under the car
  • Check Valve Filter: Radium check valve fuel filter in a heat shield bracket
  • Filter Element: finer 6 micron microglass element
  • Regulator: Radium dual fuel pressure regulator (DFPR)
  • Billet Line Retainers: 2 billet fuel/brake line retainers secure the 8AN feed line
  • Hanger FPR Block-Off: Block-off kit for the hanger's integrated FPR included

What's Included

  • Fuel hanger FPR block-off kit (20-0806)
  • New feed and return fittings
  • 6AN PTFE fuel lines
  • 8AN PTFE fuel lines (x3), including the long underbody feed line
  • Billet fuel/brake line retainers (x2)
  • Radium check valve fuel filter (finer 6 micron microglass element) with heat shield bracket
  • Radium dual fuel pressure regulator (DFPR)
  • Adapters and fittings for the direct injection HPFP and port injection fuel rail

Optional Parts

  • Radium Fuel Pump Hanger, 2011+ Ford Mustang/Shelby (20-1800 / 20-1801 / 20-1802) – Radium 20-180X dual pump hanger the kit plumbs from – select the version to suit your pumps
  • Radium Fuel Rails, Ford Coyote / Voodoo (20-1433) – Radium Coyote port injection fuel rails used in Radium's complete fuel delivery system
  • Radium Fuel Pressure Gauge 0-100psi (20-0029) – 0-100psi gauge Radium uses to monitor and adjust fuel pressure
  • Radium DIY Fuel Pump Hard Wiring Kit (17-0031) – one per aftermarket pump (qty 1, 2 or 3) to supply full pump current
  • Radium Fuel Hanger Plumbing Kit with Stainless Filter, Ford Mustang (2018+) (20-1817-03) – same kit with the alternative filter element

Important Notes

  • Requires a Radium 20-180X fuel pump hanger – fuel pumps, fuel rails and injectors are not included (OEM injectors can be reused)
  • Manual transmission cars: the 2-bolt flange clutch line bracket must be moved slightly to clear the filter inlet fitting
  • Fuel pressure gauges are not listed in Radium's kit contents
  • Radium's listing does not specifically mention right-hand-drive (Australian-delivered) vehicles – confirm fitment with Coore before ordering
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Ford Mustang S550 (2018-2023) – all models
  • Ford Mustang S650 (2024+) – all models

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.