

Radium Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Corvette C7 (2014-2019)
$1,224.99
or 4 interest-free payments of $306.25 with Afterpay
Part no. 20-1011-05
Available to order - allow extra time for delivery
- Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
- Secure checkoutCard, PayPal and Afterpay accepted.
- Not sure it fits?Contact us with your car and we'll check before you order.
Radium Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Corvette C7 (2014-2019)
Application: Chevrolet Corvette C7 (2014-2019) – manual transmission only, with Radium 20-1010 hanger Part Type: Fuel hanger plumbing kit with Microglass filter Part Number: 20-1011-05
The Radium 20-1011-05 Plumbing Kit supplies all the plumbing between the Radium 20-1010 C7 fuel pump hanger and the engine – fuel filter, fuel pressure regulator, hoses, adapter fittings and mounting hardware. From the hanger outlet, 8AN PTFE hose runs to a chassis-mounted check-valve fuel filter near the tank, and a tee in the feed line allows the OEM pressure sensor to be retained for tuning.
A second 8AN PTFE hose runs through the tunnel to the regulator, with thermal insulation protecting the hose and vacuum tubing from the exhaust. The MPR-RA regulator mounts near the brake master cylinder and connects to the OEM high-pressure fuel pump through the stock feed line via an SAE quick connect, while the OEM feed line from the tank is repurposed as the return line. A fuel pressure gauge and adapters are included to calibrate the regulator.
Key Features
- Complete Plumbing: Filter, regulator, gauge, hoses, fittings and mounts in one kit
- MPR-RA Regulator: Multi-port regulator mounted near the brake master cylinder
- Check-Valve Filter: Chassis-mounted filter with integrated check valve
- OEM Pressure Sensor: Tee in the feed line retains the OEM sensor for tuning
- PTFE Lines: 8AN PTFE feed hoses and 6AN PTFE hose
- Heat Protection: Thermal insulating sleeve against exhaust heat
What's Included
- MPR-RA fuel pressure regulator
- Fuel pressure gauge
- Fuel filter with check valve (-05 Microglass version)
- C7 Corvette fuel filter mount and FPR mount
- 8AN filter adapter fittings
- 8AN PTFE fuel feed hoses
- 6AN PTFE fuel hose
- Thermal insulating sleeve
- Stainless steel hardware
Optional Parts
- Radium Engineering Fuel Hanger 2014–2019 C7 Corvette – Pumps Not Included (20-1010) – the C7 fuel pump hanger this kit plumbs (required)
- Radium Engineering Dual Pump Add-On Mid 2003–2019 Corvette (20-0937) – adds a second independent collector and pump; outlets merge into the single 10AN ORB outlet with check valves for staging
Important Notes
- Manual transmission only – the plumbing kit is not compatible with automatic transmissions because of fuel filter mount interference
- Radium's product page lists only a 10 micron stainless check-valve filter for this kit – contact Coore to confirm the filter element supplied with the -05 version
- The regulator bracket is designed around the factory (left-hand-drive) brake master cylinder location – right-hand-drive converted Corvettes should confirm fitment with Coore before ordering
- Fuel pump hanger sold separately
- Installation instructions are available in the Instructions tab
Vehicle Fitment
- Chevrolet Corvette C7 (2014-2019) – manual transmission
Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.
You Might Also Need



Bestseller