Radium 20-0983-05 Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Corvette C6 (2009-2013)
Radium Engineering

Radium Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Corvette C6 (2009-2013)

$1,154.99

or 4 interest-free payments of $288.75 with Afterpay

Part no. 20-0983-05

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium Fuel Hanger Plumbing Kit with Microglass Filter, Chevrolet Corvette C6 (2009-2013)

Application: Chevrolet Corvette C6 2009–2013 – manual transmission only, with Radium 20-0980 hanger Part Type: Fuel hanger plumbing kit with Microglass filter Part Number: 20-0983-05

The Radium 20-0983-05 Plumbing Kit supplies all the plumbing between the Radium 20-0980 fuel pump hanger and the engine – fuel filter, fuel pressure regulator, fuel lines, adapter fittings and mounting hardware. From the hanger pump outlet, 8AN PTFE hose runs to a chassis-mounted fuel filter near the tank, then another 8AN PTFE hose runs through the tunnel alongside the torque tube to the regulator, secured with stainless cushioned clamps and protected from the exhaust by thermal sleeving.

The MPR-RA regulator mounts on a billet aluminium bracket near the brake master cylinder and connects to the OEM fuel rail through the stock feed line via an SAE quick connect. The OEM feed hard line is repurposed as the return line, with 6AN hose and adapters supplied for both ends. Because the brake master cylinder changed between 2008 and 2009, the regulator bracket is year-specific – this kit suits Chevrolet Corvette C6 2009–2013.

Key Features

  • Complete Plumbing: Filter, regulator, gauge, hoses, fittings and mounts in one kit
  • MPR-RA Regulator: Multi-port regulator on a billet bracket near the brake master cylinder
  • Microglass Filter: Microglass filter element in a Corvette chassis mount
  • PTFE Feed Lines: 8AN PTFE feed hoses with stainless cushioned clamps
  • Return Line: OEM feed hard line repurposed as the return, with 6AN hose and adapters
  • Heat Protection: Thermal insulating sleeve against exhaust heat

What's Included

  • MPR-RA fuel pressure regulator
  • Fuel pressure gauge and adapters
  • Fuel filter – Microglass element (-05)
  • Corvette fuel filter mount and FPR mount
  • 8AN filter adapter fittings
  • 8AN PTFE fuel feed hoses and 6AN fuel return hose
  • 6AN PushLok hose ends
  • Thermal insulating sleeve
  • OEM rail connection and feed line retainers
  • Stainless steel hardware

Optional Parts

  • Radium Fuel Pump Hanger, Chevrolet Corvette (Mid 2003-2013) - Pumps Not Included (20-0980) – the Corvette fuel pump hanger this kit plumbs (required)
  • Radium Engineering Dual Pump Add-On Mid 2003–2019 Corvette (20-0937) – adds a second independent collector and pump; outlets merge into the single 10AN ORB outlet with check valves for staging
  • Radium FPR Bypass, Chevrolet Corvette (Mid 2003-2013) (20-0574) – needed to run fuel pressure below the OEM 58 psi

Important Notes

  • Not compatible with automatic transmissions – the bell housing interferes with the fuel filter mount
  • Regulator bracket is year-specific – Mid-2003–2008 cars use 20-0981-03 / 20-0981-05
  • With aftermarket fuel rails, Radium recommends feeding each front rail port independently and plugging the rear ports – no parts are included for this
  • The regulator bracket is designed around the factory (left-hand-drive) brake master cylinder location – right-hand-drive converted Corvettes should confirm fitment with Coore before ordering
  • Fuel pump hanger sold separately
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Chevrolet Corvette C6 (2009–2013) – manual

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.