Radium 14-0274 10AN Male Bung, Aluminium
Radium Engineering

Radium 10AN Male Bung, Aluminum

$43.99

or 4 interest-free payments of $11.00 with Afterpay

Part no. 14-0274

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Radium 10AN Male Bung, Aluminum

Application: USDM Mitsubishi Lancer Evolution VIII–IX magnesium valve cover (press-in); universal weld-in Part Type: 10AN male bung, aluminium – press-in or weld-in Part Number: 14-0274

This aluminium fitting has a 10AN male thread and a 16.6mm diameter press-in section. As a press-in fitting it is designed for the USDM Mitsubishi Evolution VIII–IX magnesium valve cover, where it replaces the PCV valve bushing – so installation does not require valve cover removal.

The fitting is machined to extremely close tolerances for a tight fit, and it can also be used as a weld-in bung for universal applications on aluminium surfaces.

Key Features

  • Thread: 10AN male with 37 degree flare sealing surface
  • Press-In Diameter: 16.6mm
  • No Valve Cover Removal: Replaces the PCV valve bushing on the USDM Evo VIII–IX valve cover
  • Tight Tolerance: Machined for a tight press fit
  • Weld-In Option: Can be welded to aluminium surfaces for universal applications

Important Notes

  • NOT compatible with the JDM Evo IV–IX valve cover, which uses a different PCV valve
  • The aluminium fitting cannot be welded to the magnesium valve cover – only weld to aluminium surfaces
  • For press-in installation, freeze the fitting for 5–10 minutes before pressing it in with a rubber mallet; a small gap under the hex is normal when correctly seated
  • For weld-in installation, drill a 17mm (43/64") hole and enlarge only as needed for a press fit; mask the threads if painting or powder coating
  • Protect the 37 degree flare sealing surface with a 10AN cap or hose end during installation
  • Hold the fitting with a 7/8" spanner when attaching a hose end
  • Installation instructions are available in the Instructions tab

Vehicle Fitment

  • Mitsubishi Lancer Evolution VIII – USDM magnesium valve cover (press-in)
  • Mitsubishi Lancer Evolution IX – USDM magnesium valve cover (press-in)
  • Universal weld-in for aluminium surfaces

Not sure if this suits your vehicle? Email sales@coore.com.au and our team will confirm fitment.