Pulsar Turbos Australia PULSAR PSR2860R GEN 2 Turbocharger - T25 .64 5 Bolt IWG / Standard / Standard Housing
Pulsar Turbos Australia

PULSAR PSR2860R GEN 2 Turbocharger

$1,019.00

or 4 interest-free payments of $254.75 with Afterpay

Part no. 102128120

Turbine Housing Options

Compressor Housing Options

Housing Style

1

In stock

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.
  • Dual Ceramic Ball Bearing System
  • 8 Blade Gen2 Billet Compressor Wheel with Extended Tapered Tip Technology
  • Inconel 713c 9-blade Turbine Wheel
  • Gen2 Cover Integrated with the Speed Sensor Port
  • 0.64, 0.86A/R T25 Inlet, 5 Bolt Outlet, 0.64 A/R dual V-BAND stainless steel, 0.82 A/R dual V-BAND stainless steel, etc. turbine housings in option
  • V-Band Flange kit(s) for the exhaust housing included
  • Max Air Flow rate: ~40 lb/min, rated @ 475 FWHP
  • Compressor Wheel: 45.64/60.07/62mm
  • Turbine Wheel: 54/47mm
  • Compressor Inlet: 3″ Hose
  • Compressor Outlet: 2″ Hose
  • Turbine Inlet: T25 or 2.5″ V-Band
  • Turbine Outlet: 5 Bolt or 3″ V-Band (3.55″ OD)
  • Oil Feed: -4 AN connect to the Oil Restrictor
  • Oil Drain: Std T3 Flange
  • Water In/Outlet: M14*1.5

We highly recommended running water cooling for better durability.

Housing Options

  • T25 .64 5 Bolt IWG
  • T25 .86 5 Bolt IWG
  • .82 SS Dual V-Band
  • .64 SS Dual V-Band

Housing Style

  • Standard Housing
  • Stainless Steel Wrapped Housing — available at additional cost
  • (Please allow 1-2 weeks for stainless steel wrapped housings if stock isn’t available.)

The Stainless Steel Wrapped Housing option adds an external stainless steel heat-retaining wrap around the turbine housing to help contain radiant heat around the turbine area.

Where listed, the turbocharger can also be selected without a turbine housing.

You Might Also Need