Pulsar Turbos Australia PULSAR 7375G 1200HP 73mm Dual Ball Bearing Turbo - 1.15 A/R Dual V-Band / Standard / Standard Housing
Pulsar Turbos Australia

PULSAR 7375G 1200HP 73mm Dual Ball Bearing Turbo

$1,649.00

or 4 interest-free payments of $412.25 with Afterpay

Part no. 102142250

Turbine Housing Options

Compressor Housing Options

Housing Style

1

In stock

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.
  • Dual ceramic ball bearing system provides optimal turbo response & better durability by reducing the shaft-motion
  • 10 Blade G-Aero billet compressor wheel with extended tapered tip technology
  • 9 Blade G-Aero Inconel 713c turbine wheel
  • Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor port
  • 8 Options in Turbine Housing
  • Installation Hardware: 3” flange kit for Comp. Outlet, T4 Gasket/3” flange kit for Turb. Inlet, 3.5”/4” flange kit for Turb. Outlet and oil Drain Fitting kit are included by default
  • Oil Feed Fitting needs to be bought separately
  • Compressor Wheel: 73*91mm
  • Turbine Wheel: 82*75mm
  • Compressor Inlet: 4″ Hose
  • Compressor Outlet: 3″ hose
  • Turbine Inlet: 3″ V-Band, T4 divided or T4 open
  • Turbine Outlet: 3.5″ V-Band or 4″ V-Band
  • Water Ports: -6AN
  • Oil Feed: Flange Required(Recommended size: -4AN Std T4 Flange)
  • Oil Drain: -12AN(O-Ring sealed Flange Kit Incl’)
  • Comes with Inlet flange and clamp (DVB) and Outlet flange and clamp

Turbine housing option

  • T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.01 A/R
  • T4(Open) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 0.95A/R
  • T4(Divided) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.28 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.01 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.28 A/R

Housing Options

  • 1.15 A/R Dual V-Band
  • 1.15 A/R T4 Open
  • 1.28 A/R Dual V-Band
  • 1.28 A/R T4 Divided
  • 1.01 Dual V Band
  • 1.15 Divided T4
  • 1.01 Divided T4
  • .95 Divided T4

Housing Style

  • Standard Housing
  • Stainless Steel Wrapped Housing — available at additional cost
  • (Please allow 1-2 weeks for stainless steel wrapped housings if stock isn’t available.)

The Stainless Steel Wrapped Housing option adds an external stainless steel heat-retaining wrap around the turbine housing to help contain radiant heat around the turbine area.

Where listed, the turbocharger can also be selected without a turbine housing.

You Might Also Need