Pulsar Turbos Australia PSR Class Legal 6775G Dual Ball Bearing Turbocharger - Standard / T4 Divided 1.01 A/R / Standard Housing
Pulsar Turbos Australia

PSR Class Legal 6775G Dual Ball Bearing Turbocharger

$1,649.00

or 4 interest-free payments of $412.25 with Afterpay

Part no. 102142200

Compressor Housing Option

Turbine Housing Option

Housing Style

1

In stock

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.
  • PSR Class Legal Turbo with 67/98mm Compressor wheel
  • Dual ceramic ball bearing system provides optimal turbo response & better durability by reducing the shaft-motion
  • 10 Blade G-Aero billet compressor wheel with extended tapered tip technology
  • 9 Blade G-Aero Inconel 713c turbine wheel
  • Anti-Surge ported-shroud compressor inlet, cover integrated with the speed sensor port
  • Installation Hardware: 3” flange kit for Comp. Outlet, T4 Gasket/3” flange kit for Turbo. Inlet, 3.5”/4” flange kit for Turbo. Outlet and oil Drain Fitting kit are included by default
  • Oil Feed Fitting(-4AN ∅ 1.65mm (0.065″) Orifice) included
  • -Compressor Wheel: 67*98mm
  • -Turbine Wheel: 82*75mm
  • -Compressor Inlet: 5″ Hose
  • -Compressor Outlet: 3″ V-Band
  • -Water Ports: -6AN
  • -Oil Drain: Angle 15°, -12AN(O-Ring sealed Flange Kit Incl’)

Turbine housing option

  • T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.01 A/R
  • T4(Open) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • T4(Divided) inlet, Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • T4(Divided) inlet, Vband outlet (fits 4″ OD tubing), 1.28 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.01 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.15 A/R
  • Vband inlet (fits 3″ OD tubing) and Vband outlet (fits 3.5″ OD tubing), 1.28 A/R

Housing Options

  • T4 Divided 1.01 A/R
  • T4 Divided 1.15 A/R
  • T4 Divided 1.28 A/R
  • T4 Open 1.15 A/R
  • Dual V Band 1.01 A/R
  • Dual V Band 1.15 A/R
  • Dual V Band 1.28 A/R

Housing Style

  • Standard Housing
  • Stainless Steel Wrapped Housing — available at additional cost
  • (Please allow 1-2 weeks for stainless steel wrapped housings if stock isn’t available.)

The Stainless Steel Wrapped Housing option adds an external stainless steel heat-retaining wrap around the turbine housing to help contain radiant heat around the turbine area.

Where listed, the turbocharger can also be selected without a turbine housing.

You Might Also Need