Motul Motyl Gear 75W-90 100% Semi Synthetic - 1L
Motul

Motul Motyl Gear 75W-90 100% Semi Synthetic

$29.70

or 4 interest-free payments of $7.43 with Afterpay

Part no. 109055

Options

1

Available to order - allow extra time for delivery

  • Shipped Australia-wideDelivery cost is shown at checkout. Shipping policy
  • Secure checkoutCard, PayPal and Afterpay accepted.
  • Not sure it fits?Contact us with your car and we'll check before you order.

Motul Motyl Gear 75W-90 100% Semi Synthetic

  • Specially recommended for gearboxes hard to shift and/or noisy gearboxes.
  • All mechanical transmission synchronised or not synchronised gearboxes, gearbox/differential, transfer gearbox and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES

STANDARDS:

  • API GL-5 and GL-4
  • MIL-L-2105D

Technosynthese® “Extreme Pressure” lubricant for an efficient anti-wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time.

  • Stays in viscosity grade 90 after the KRL 20 hours shear test as requested by SAE J306 Standard.
  • Very high lubricating power which decreases friction and wear.
  • Viscosity grade 90 at high temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
  • Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
  • Less effort required on the gear lever to shift the gears.
  • Suitable for any type of seal and yellow material used in gearboxes design.
  • Anti-corrosion, Anti-foam.

RECOMMENDATIONS Oil change: According to manufacturers' requirements and adjust according to your own use.

PROPERTIES

Viscosity grade SAE J 306 75W90

Density at 20°C (68°F) ASTM D1298 0.859

Viscosity at 40°C (104°F) ASTM D445 114.0 mm²/s

Viscosity at 100°C (212°F) ASTM D445 17.1 mm²/s

Viscosity index ASTM D2270 165

Flash point ASTM D92 216°C / 421°F

Pour point ASTM D97 -42°C / -44°F

You Might Also Need